How to Make Customizable Wood Pendant Light

Wood Pendant Light Assembly Instructions:

Step 1: Unpack the package and lay out all the components on a clean and flat surface.

Step 2: Identify the Upper Ring and Lower Ring components. The Upper Ring is usually larger in size compared to the Lower Ring.

Step 3: Take the Upper Ring and apply a small amount of glue on the inner rim of the ring.

Step 4: Carefully place the Wood Blade onto the glue, ensuring it is aligned properly with the ring. Press down gently to secure it in place.

Step 5: Repeat Step 4 until all the Wood Blades are fixed onto the Upper Ring. Make sure to evenly space them apart for a balanced appearance.

Step 6: Once all the Wood Blades are attached, apply a thin layer of glue on the top surface of each blade to reinforce the bond.

Step 7: Now, take the Lower Ring and apply a small amount of glue on the inner rim.

Step 8: Place the Lower Ring onto the Wood Blades, aligning it with the Upper Ring. Press down gently to secure it in place.

Step 9: Allow the glue to dry according to the instructions provided by the manufacturer, usually for a few hours.

Step 10: After the glue has completely dried, double-check all the connections to ensure stability.

Step 11: Your Wood Pendant Light assembly is now complete. Install it in the desired location following the manufacturer's installation instructions.

Note: If you encounter any difficulties during the assembly process or have any questions, please refer to the manufacturer's provided instructions or consult our customer support for further assistance.